AMY2A5 ELISA Kit (Mouse)

ELISA Kit

Root Catalog/Products/ELISA Kits, Root Catalog/Products/Kit

Amy2a2|Amy2a3|Amy2a4|Amy2a5

508

Pancreatic alpha-amylase

NP_001036176.1

This assay has high sensitivity and excellent specificity for detection of Amylase Alpha 2, Pancreatic (AMY2).No significant cross-reactivity or interference between Amylase Alpha 2, Pancreatic (AMY2) and analogues was observed.

Component: Amount
Anti-AMY2A5 Microplate: 96 Wells (12 x 8 Well strips)
AMY2A5 Lyophilized Standard: 2
100X Biotinylated AMY2A5 Detector Antibody: 1 x 120 uL
100X Avidin-HRP Conjugate: 1 x 120 uL
Standard Diluent: 1 x 20 mL
Detector Antibody Diluent: 1 x 12 mL
Conjugate Diluent: 1 x 12 mL
30X Wash Buffer: 1 x 20 mL
Stop Solution: 1 x 6 mL
TMB Substrate: 1 x 9 mL

3h

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Amylase, Alpha 2A (AMY2A). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Amylase, Alpha 2A (AMY2A). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Amylase, Alpha 2A (AMY2A), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm +/- 10nm. The concentration of Amylase, Alpha 2A (AMY2A) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Amylase, Alpha 2A (AMY2A) were tested 20 times on one plate, respectively. Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Amylase, Alpha 2A (AMY2A) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100 Intra-Assay: CV<10% Inter-Assay: CV<12%