0.6 mm Special Glass 10 Capillary

25 pack of 0.6 mm Special Glass 10 Capillary
APPLICATIONS
X-ray data collection
Liquid-liquid diffusion crystallization
Gel acupuncture crystallization
FEATURES
Thin walled - 10 micron
Special Glass 10 (Glass 0100, soda lime glass)
DESCRIPTION
Crystal Clear Special Glass 10 (Glass 0100, soda lime glass) capillaries that are extremely thin walled (approximately 10 micron wall thickness). The length of the capillary has a well defined diameter, with one end having a funnel shape and the other end closed. Glass capillaries have a wall thickness of 0.01 mm and an overall length of 80 mm +/-5 mm. Glass capillaries are available in a wide range of outside diameters from 0.1 mm to 2.0 mm. They are designed to mount, hold, and store small molecule and biological macromolecular crystals for x-ray data collection. Capillaries can also be used for crystal density measurements and crystal growth experiments. The capillaries can be sealed tightly against moisture and gases using wax, epoxy, or other sealing materials.
In determining what glass or quartz capillary is right for you, please refer to the "Linear Absorption Coefficient u cm-1" table. This table indicates the amount of radiation that is absorbed by the capillary during x-ray data collection.
For 0.1 mm to 2.0 mm capillaries the open end capillary tube base size is 3.0 +/- 0.15 mm OD x 0.2 +/- 0.10 mm Wall thickness.
Special Glass 10 has a Linear Absorption Coefficient of 126.0 u cm-1 for u CuK Radiation (Wavelength for Copper radiation is 1.5418 Angstrom) and 14.7 u cm-1 MoK Radiation (Wavelength for Molybdenum radiation is 0.7107 Angstrom) and a softening temperature of 815 degrees Celsius.
The Diameter is measured about 30 to 40 mm from the closed end (measuring instrument: LaserMicrometer LS 7500) The tolerances are as follows.
Diameter Tolerance Minimum Diameter Maximum Diameter
0.1 mm +/-0.05 mm 0.05 mm 0.15 mm
0.2 mm +/-0.05 mm 0.15 mm 0.25 mm
0.3 mm +/-0.05 mm 0.25 mm 0.35 mm
0.4 mm +/-0.05 mm 0.35 mm 0.45 mm
0.5 mm +/-0.05 mm 0.45 mm 0.55 mm
0.6 mm +/-0.05 mm 0.55 mm 0.65 mm
0.7 mm +/-0.05 mm 0.65 mm 0.75 mm
0.8 mm +/-0.05 mm 0.75 mm 0.85 mm
0.9 mm +/-0.05 mm 0.85 mm 0.95 mm
1.0 mm -0.05 +0.25 mm 0.95 mm 1.25 mm
1.5 mm +/-0.25 mm 1.25 mm 1.75 mm
2.0 mm +/-0.25 mm 1.75 mm 2.25 mm
Soda Lime Glass Specifications
Borosilicate Specifications
Glass type Soda lime glass
Density 2.52 g/cm3
Poisson's number 0.22
Transformation temperature Tg= 520 degrees Celsius
Annealing point approximately 530 degrees Celsius
Softening point approximately 708 degrees Celsius
Working point 1035 degrees Celsius
Refractive index 1.514 at 20 degrees Celsius; 589.3 nm
Hydrolytic resistance, class 3 (DIN 12 111)
Acid resistance, class 1 (DIN 12 116)
Alkalai resistance, class 2 (DIN 52 322)
Chemical composition
SiO2 69%
Na2O 13%
Al2O3 4%
K2O 3%
B2O3 1%
BaO 2%
CaO 5%
MgO 3%
Capillaries have only been tested at atmospheric pressure (760 mmHg (torr), 29.92 inHg, 14.696 psi). Use at other pressures has not been tested.