Mouse Toll/Interleukin-1 receptor domain-containing adapter protein (TIRAP) ELISA Kit

Hersteller Abbkine Scientific
Typ Elisa-Kit
Specific against Mouse
Applikationen ELISA
Menge 48T
ArtNr ABK-KTE70221-48T
eClass 6.1 32160605
eClass 9.0 32160605
Applications notes
This Mouse Toll/Interleukin-1 receptor domain-containing adapter protein (TIRAP) ELISA Kit employs a two-site sandwich ELISA to quantitate TIRAP in samples. An antibody specific for TIRAP has been pre-coated onto a microplate. Standards and samples are pipetted into the wells and anyTIRAP present is bound by the immobilized antibody. After removing any unbound substances, a biotin-conjugated antibody specific for TIRAP is added to the wells. After washing, Streptavidin conjugated Horseradish Peroxidase (HRP) is added to the wells. Following a wash to remove any unbound avidin-enzyme reagent, a substrate solution is added to the wells and color develops in proportion to the amount of TIRAP bound in the initial step. The color development is stopped and the intensity of the color is measured.
Detection method
Sample type
Cell culture supernatants#Serum#Plasma#Other biological fluids
Assay type
Sandwich ELISA (quantitative)
Assay duration
Multiple steps standard sandwich ELISA assay with a working time of 3-5 hours. It depends on the experience of the operation person.
Kit components

Mouse Toll/Interleukin-1 receptor domain-containing adapter protein microplate
Mouse Toll/Interleukin-1 receptor domain-containing adapter protein standard
Mouse Toll/Interleukin-1 receptor domain-containing adapter protein detect antibody
Standard diluent
Assay buffer
HRP substrate
Stop solution
Wash buffer
Plate covers
Features & Benefits
Mouse Toll/Interleukin-1 receptor domain-containing adapter protein (TIRAP) ELISA Kit has high sensitivity and excellent specificity for detection of Mouse TIRAP. No significant cross-reactivity or interference between Mouse TIRAP and analogues was observed.
Usage notes
Do not mix components from different kit lots or use reagents beyond the kit expiration date.
Allow all reagents to warm to room temperature for at least 30 minutes before opening.
Pre-rinse the pipet tip with reagent, use fresh pipet tips for each sample, standard and reagent to avoid contamination.
Unused wells must be kept desiccated at 4 C in the sealed bag provided.
Mix Thoroughly is very important for the result. It is recommended using low frequency oscillator or slight hand shaking every 10 minutes.
It is recommended that all samples and standards be assayed in duplicate or triplicate.
Storage instructions
The unopened kit should be stored at 2 - 8C. After opening, please store refer to protocols.
Gel pack with blue ice.
The product listed herein is for research use only and is not intended for use in human or clinical diagnosis. Suggested applications of our products are not recommendations to use our products in violation of any patent or as a license. We cannot be responsible for patent infringements or other violations that may occur with the use of this product.
TIRAP is a TIR adaptor protein involved in the TLR4 signaling pathway of the immune system. It activates NF-kappa-B, MAPK1, MAPK3 and JNK, which then results in cytokine secretion and the inflammatory response. Alternative splicing of this gene results in several transcript variants; however, not all variants have been fully described. MAL, unlike MYD88, does not interact with IRAK1 and is not inhibited by the dominant-negative N-terminal region of IRAK1; however, like MYD88, MAL does, through its TIR domain, interact with and is inhibited in NFKB activation by the dominant-negative form of IRAK2. A dominant-negative form of MAL inhibits TLR4 or lipopolysaccharide activation of NFKB, but not NFKB activation by IL1R1 or IL18R. Immunoprecipitation analysis showed that TLR4 and MAL are constitutively associated.
Gene ID
TIRAP; FLJ42305; Mal; wyatt; MyD88 adapter-like protein; OTTHUMP00000179130; Toll-interleukin 1 receptor domain-containing adaptor protein; Toll-like receptor adaptor protein; adapter protein wyatt

Hinweis: Die dargestellten Informationen und Dokumente (Bedienungsanleitung, Produktdatenblatt und Sicherheitsdatenblatt) entsprechen unserem letzten Update und sollten lediglich der Orientierung dienen. Wir übernehmen keine Garantie für die Aktualität. Für spezifische Anforderungen bitten wir Sie, uns eine Anfrage zu stellen.

Menge: 48T
Lieferbar: In stock
Listenpreis: 413,24 €
Preis: 413,24 €


Auf den Wunschzettel

Angebot anfordern

Fragen zum Produkt?