UPBT-1011 Paraffin Block Trimmer

The Paraffin Block Trimmer ( generally called Wax Trimmer, Paraffin Trimmer, Wax Remover, Paraffin Remover, Dewaxer etc) is one of the histology equipment using for the research. The Paraffin Block Trimmer enables the researchers to trim the paraffin blocks automatically. This instrument removes only paraffin residues around the paraffin blocks without damage to the tissue samples or the plastic cassette. When users load the paraffin blocks finished the embedding process, the blocks moves to trim the paraffin residues into the instrument and the trimmed block is discharged from the outlet of the instrument.Eventually, this instrument also enables to save the research time and to prevent the users from any injuries caused by the conventional trimming way. Features 1) Save time and labor of researchers2) Protect researchers from physical damages by conventional trimming tools like razor.3) Max. 800 paraffin blocks can be trimmed in an hour.4) Semipermanant life time of trimming modules (Cutting blade replacement is unnecessary)5) Check trimmed block quantity on the LCD Panel.6) LCD Panel shows the status of trimming process7) Suitable for various kinds of embedding cassettes. How to Use 1. Check the power line connection . Turn on the main power switch located at the bottom of left side. Then "Stand by / Press START" will appear on the LCD display. 2. Press Start button to initialize the trimmer. Then "UNITMA CO., LTD. / Initializing..." will appear on LCD display shortly, followed by "Stand by / Pls load blocks". 3. Press Pause button and load paraffin blocks on the tray #2 4.Press Start to start trimming. 5. When the conveyor belt is moving, continue to load blocks on the tray #1 to trim other blocks. Then, "Running / Block count: xx" will appear in the LCD panel. Trimmed blocks will come out of the outlet on the front of the trimmer. With the sensors in the tray #2, the trimmer can recognize the block and its direction. When there is no block on the tray #2, the trimmer will trim the previously loaded blocks and stop. In order to continue trimming when the previously loaded blocks were trimmed completely and the trimmer stopped, pressPause and load a block on the tray #2, then press Start, and then, continue to load blocks only on the tray #1 afterward. 6. When the required blocks are finished, turn the main switch off. For more information, please visit this page: http://www.ihcworld.com/products/Unitma-Paraffin-Block-Trimmer.htm