Comparison

3um cellulose nitrate filters, 25x80mm, quantity 100 filters

Item no. NRP-SCB3
Manufacturer Neuro Probe
Amount 1ea
Category
Type Disposable items, General labware
Specific against other
ECLASS 10.1 32039090
ECLASS 11.0 32039090
UNSPSC 41121800
Available
Description
Polycarbonate track-etch (PCTE) membranes are the primary type of filters used in our chambers and instrument systems. This is a very thin membrane ranging between 6-10um in nominal thickness. This membrane type offers excellent uniformity in pore size and density, as well as other benefits such as low extractables, low protein binding, and negligible absorption. These characteristics make it ideally suited for use in chemotaxis assays as well as other high purity screening assays.

PVP Treatment –PCTE membranes are available pre-treated with the wetting agent polyvinylpyrrolidone (PVP) which makes the surface hydrophilic. PVP-treated membranes are used when the media solutions cannot wet out the membrane by themselves. This occurs primarily when working with very small pore sizes or high viscosity media solutions. Certain cell types such as neutrophils do not adhere well to PVP treated membranes and tend to drop off after migrating. While this is problematic when quantifying filters on the membrane, some researchers using the ChemoTx sytem or the MB-series 96-well chambers and quantifying in the plate find this to be an advantage. Extra-cellular matrix proteins do not adhere well to PVP treated membranes either. If your assay requires such coating, we recommend using PVP-free membranes.
Filters for the AP48, AC48, AA12 and AA10 are also available in cellulose nitrate. These are much thicker (ca.150 um) fibrous filters, sometimes referred to as "torturous path" filters. Rather than counting cells that have migrated through the membrane, as is commonly done with PCTE membrane, these filters are clarified with solvents after a predetermined incubation, and a high-resolution light microscope is used to observe how far into the filter the cells have migrated. This is also known as a "leading edge" study. These filters have a recommended shelf life of one year. They are cut to order, so please allow 2-3 days for processing.
Weight
0.1875 lbs
Dimensions
5 x 4 x 1 in
Pore Size
3um, 5um, 8um, 10um, 12um
Filter Membranes
Standard PCTE, PCTE with PVP, Cellulose Nitrate

Note: The presented information and documents (Manual, Product Datasheet, Safety Datasheet and Certificate of Analysis) correspond to our latest update and should serve for orientational purpose only. We do not guarantee the topicality. We would kindly ask you to make a request for specific requirements, if necessary.

All products are intended for research use only (RUO). Not for human, veterinary or therapeutic use.

 
Close