Somatostatin (SST) BioAssay™ ELISA Kit (Human)

Kits and Assays / Kits-ELISA, BioAssay™

4°C/-20°C

The Somatostatin (SST) BioAssay™ ELISA Kit is a quantitative competitive assay for the detection of SST in human serum, plasma and other biological fluids. Cell lysates and tissue homogenates, though not tested, may potentially be used as samples.

Detection Range:
7.813-500pg/ml

Sensitivity:
4.688pg/ml

Precision:
Intra-assay CV: <8%
Inter-assay CV: <10%

Assay Principle:
This ELISA kit employs the quantitative competitive enzyme-linked immunoassay technique, utilizing a microtiter plate provided in this kit has been pre-coated with SST. Standards and samples are added to the appropriate microtiter plate wells followed by a biotin-conjugated antibody specific to SST. Streptavidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain SST, Biotin-conjugated antibody and enzyme-conjugated Streptavidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulfuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of SST in the sample is then determined by comparing the O.D. of the sample to the standard curve.

Kit Components:
*359042A: Microtiter Strips, 1x48 wells or 1x96 wells
*359042B: Standard, 1x1vial or 2x1 vials
359042C: Sample/Standard Dilution Buffer, 1x10ml pr 1x20ml
359042D: Antibody (Biotin) (Concentrated), 1x30ul or 1x60ul
359042E: Antibody Dilution Buffer, 1x5ml or 1x10ml
359042F: Streptavidin (HRP) (SABC), 1x60ul or 1x120ul
359042G: SABC Dilution Buffer, 1x5ml or 1x10ml
359042H: TMB Substrate, 1x5ml or 1x10ml
359042J: Stop Solution, 1x5ml or 1x10ml
359042K: Wash Buffer, 25X, 1x15ml or 1x30ml

Storage and Stability:
Store unopened *359042A at 4ºC; store at -20ºC once opened. Store unopened *359042B at 4°C; once reconstituted, store at 4°C for up to 12 hours or at -20°C for up to 48 hours. Store other components at 4°C. Kit is stable for 6 months after receipt. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.

Assay Summary:
1. Wash plate 2 times before adding standards and samples to wells.
2. Add 50ul standard or sample to each well.
3. Immediately add 50ul Antibody-Biotin working solution to each well and incubate for 45 minutes at 37°C
4. Aspirate and wash 3 times.
5. Add 100ul SABC working solution to each well. Incubate for 30 minutes at 37°C
6. Aspirate and wash 5 times.
7. Add 90ul TMB substrate. Incubate 10-20 minutes at 37°C
8. Add 50ul Stop Solution. Read at 450nm immediately.
9. Calculate results.